4 ways to make an air humidifier from a plastic bottle

It is vital for your comfort and health to keep your home at the proper humidity level, particularly in dry seasons or low-humidity areas. Even though there are many different kinds of commercial air humidifiers on the market, you can also make your own humidifier at home with basic supplies like a plastic bottle. This is not only an economical solution, but it also gives you the option to modify the humidifier to meet your individual requirements. This post will discuss four inventive ways to create an air humidifier out of a plastic bottle, providing useful and doable solutions for raising the humidity in your home.

Using a plastic bottle, water, and an airflow source—like a fan or computer fan—is a common way to create a homemade air humidifier. This straightforward but efficient design raises humidity levels by generating a fine mist of water vapor that is subsequently released into the atmosphere. You can make sure the mist is dispersed evenly throughout the room and provides consistent moisture for improved comfort by strategically attaching the fan to the bottle.

Adding a wick system to your plastic bottle humidifier is another way to DIY air humidification. Using a porous wick, like a sponge or cotton cloth, this technique collects water from the bottle and progressively releases it into the surrounding air. You can modify the rate of evaporation and customize the humidity output to your liking by modifying the size and positioning of the wick. This adaptable method is well-liked by do-it-yourselfers since it is simple to put together and effective.

A terracotta cone and a plastic bottle can be used to make a terracotta humidifier, which is a more environmentally friendly and natural alternative. The innate ability of terracotta clay to absorb water and gradually release it is utilized in this creative design. The terracotta cone should be inserted into the bottle after it has been filled with water to create a self-regulating humidification system that needs little upkeep. This technique not only benefits the environment, but it also gives your house a stylish touch.

A USB-powered plastic bottle humidifier is a handy way to bring moisture to the air wherever you go, making it an ideal choice for individuals looking for a portable and adaptable solution. You can make a portable and effective humidification tool that works with any regular water bottle by fastening a tiny USB-powered ultrasonic humidifier to the mouth of a plastic bottle. This useful design offers comfort and relief from dry air while on-the-go, making it perfect for use in offices, dorm rooms, or while traveling.

Method Description
1. Wick-Based Humidifier This method involves cutting a hole in the bottle cap, inserting a wick (like a cotton cloth strip), and placing the other end in a container of water. As the wick soaks up water, it evaporates into the air, increasing humidity.
2. Sponge-Based Humidifier In this approach, you cut a hole in the bottle cap, place a sponge inside the bottle, and pour water over it. The sponge absorbs the water and releases moisture into the air through evaporation.
3. Air Pump Humidifier You can create a more active humidifier by attaching an air pump to the bottle cap. The pump pushes air into the bottle, causing water to vaporize and humidify the surrounding air.
4. Candle Humidifier This method involves placing a small candle inside the bottle and filling the bottom with water. When the candle is lit, it heats the water, causing it to evaporate and increase humidity.

Option #1 BUST A volume of 6 liters

What you’ll need to make a moisturizer is:

  • plastic bottle for 6 l;
  • fan from the old computer;
  • Wire with a fork 220 V.

We take a six-liter plastic bottle. We made four holes in the shape of windows that are marginally higher than the water level because approximately one-third of the bottles will be used to pour the water. They ought to be positioned next to one another horizontally on each wall. That is, a single tiny window will be positioned on each side of a plastic bottle.

Crucial! Windows ought not to be very big. They will be required in the future to allow air to exit the moisturizer.

It will be much simpler to pour water into the container through the windows. It’s time to chop off the neck. and trim off so that the computer’s fan can be mounted at the top. It is important to compute the bottle’s diameter accurately. In order to accomplish this, you must pull back from the plastic bottle’s neck and chop off the top entirely.

Next, we drill four holes in the upper portion of the container’s corners. This is required to get the fan fixed. You can remove the device from the previous computer. These fans come from a traditional 220 V network. The remaining old wires must be removed with the soldering iron from contacts. Plug and wire usage is standard; 220 V designed.

The ends of the wires should be cleaned by 0.5 cm. They need to be covered with a soldering iron with a thin layer of solder. For this use rosin. So that the user does not hit the future with electric shock, it is worthwhile to put on the contacts 2 sections of the heat -shaped tube. Only now the contacts are soldered to the fan. When they were soldered, then with the help of a heat -shrink pipe we hide this part of the wires. In order for the tube to fix on the wire, it should be warmed with the side of the soldering iron. When heated, it is compressed and the contacts fit well.

Crucial! The inside of the plastic bottle should receive the airflow from the fan when it is turned on. In our moisturizer, that is.

Finding the direction in which the fan is blowing is required in order to accomplish this. We add the network and use a piece of paper to map out the direction of the airflow. Take the device off the network for a bit. Fix the fan housing on top of our plastic bottle using four sections of a soft copper wire. The wire is inserted into pre-drilled holes in the moisturizer’s walls. With nippers, the excess wire is fixed and then removed.

Don’t worry if the fan’s diameter differs slightly from the bottle’s; the important thing is to adjust it properly using the wire on all four sides. In any event, the damaged supply air will be forced out of the jar with the aid of these fissures. You are unable to touch the fan blades with your fingers once it is turned on. It can cause injuries because of its strong force and careless movement.

Using the window in the wall, fill the device with water. Activate a DIY network within the network. In a 15–18 m³ medium-sized room, using such a moisturizer for an hour will result in a noticeable increase in air humidity.

Crucial! The network-connected device needs to be placed in an area that is off-limits to kids and should be steady and level.

Option #2 bottle of 1.5 liters

  • plastic bottle per 1.5 l;
  • scissors;
  • Long strip of natural fabric,
  • scotch

In the middle of the bottle, on one of the walls, it is necessary to cut a hole in the form of a square. It should be of medium sizes. Close the neck of the bottle lid. With the help of small longitudinal segments of the fabric, tie the bottle in a horizontal position. The container should be located a window up to the pipe or battery. So that the fabric does not slip from the smooth surface of the plastic, you can apply tape. Pour water through the hole made. A humidifier with a bottle under a hot pipe, not far from the battery, will moisturize the air in the house due to intensive vapor of water.

You can place the bandage on the battery by lowering a portion of it through the window so that it is hidden on one side. You can quickly and efficiently evaporate moisture by selecting this option.

An equivalent type of moisturizer is suitable for use. But in this design, the window doesn’t pop out on one side of the bottle, and a lot of tiny holes are made using the soldering iron.

Crucial! A plastic bottle only has one wall that resembles a sieve. The wall on the other side doesn’t change.

We gather water in this type of moisturizer and cover it with a lid. The bottle may be positioned horizontally on the battery. That the holes are above the water is crucial. They will be penetrated by water vapor as it evaporates. Tape can be used to hang such a design from the pipe.

Option #3 Suspension for radiator

There is still one more way to create an air humidifier with a plastic bottle and your hands. You’ll need the following for this:

  • plastic bottle of any size;
  • wire;
  • scissors.

Cut half of the bottle with scissors. Create multiple holes on the container’s sides for the wire to pass through. An alternative for mounting a plastic humidifier with a thick wire is to attach it to a battery or pipe. All that’s left to do is pour the water and watch for evaporation.

Your comfort, health, and the general state of your living environment can all be considerably improved by raising the humidity levels in your house. In this post, we looked at four easy yet efficient ways to use a plastic bottle to make your own air humidifier. These do-it-yourself remedies provide an economical and ecologically responsible means of addressing dry air, especially in the winter when indoor humidity levels tend to decrease.

We can both address the need for more moisture in the air and reduce waste by repurposing everyday household items like plastic bottles. These DIY humidifiers offer an easy-to-use remedy for a variety of problems, including dry skin, irritated sinuses, and static electricity buildup. In addition, they are easily adjustable to meet your preferences and help you achieve the ideal humidity levels in each room of your house.

In addition to saving you money on pricey commercial units, making your own air humidifier lets you express your creativity and individuality. For a pleasing scent, you can experiment with different wick types, bottle sizes, and even the addition of essential oils. With this do-it-yourself method, homeowners can take charge of their indoor environment and customize it to suit their unique requirements and tastes.

Moreover, due to their ease of use, anyone can make these DIY humidifiers, regardless of technical proficiency or financial means. These techniques provide an easy and effective way to raise the humidity levels in your house, whether you’re a do-it-yourself enthusiast looking for a fun project or someone looking for useful solutions for improving indoor air quality. You can have a more comfortable and healthier living space with very little work and a few simple materials.

In this article on "Heating and Insulation of the House," we explore doable tactics to maximize energy efficiency and indoor comfort. We investigate draft prevention strategies, window treatments, thermostat control, and insulation materials to find easy-to-implement yet efficient ways to keep your home comfortable while cutting down on energy use and utility bills. These tips provide important insights into optimizing comfort and reducing energy waste, whether your goal is to keep cool in the summer or warm in the winter.

Video on the topic

Upon learning this secret, you will never throw a plastic bottle again! Note to the masters!

Air humidifier from a plastic bottle. From the headings – do it yourself. crazy hands. With your own hands.

Moisturizer and air purifier from glass jacket and PET bottles

🌑 Eternal fountain heroon really works without electricity incredibly Heron"s Funtain Igor Beletsky

DIY Air Moisturizer from a plastic bottle PET

How to make an air humidifier yourself.Crafts made of plastic bottles.

Do it right away! Stunning idea from a plastic bottle

What type of heating you would like to have in your home?
Share to friends
Sergey Ivanov

I like to help people create comfort and comfort in their homes. I share my experience and knowledge in articles so that you can make the right choice of a heating and insulation system for your home.

Rate author
Add a comment